Phone: 228-235-1881 * Email: info@overingyachtdesing.com
Copyright 2009 Overing Yacht Designs All Rights Reserved
3D MODELING and COMPUTER FAIRING
3D MODELING
Once the preliminary design is complete a 3D CAD model is generated from the 2D lines plans. During this process the owner can see photo-realistic 3 dimensional renderings of the vessel taken from any angle. We can also produce a "fly around" of the rendered vessel. Throughout this process the owners comments and refinements can be incorporated into the model to assure the client is completely satisfied and 100% pleased with the look of the vessel prior to start of construction.
HYDROSTATICS
After development of the 3D hull model the hydrostatics are run.
PRELIMINARY STABILITY
After completion of the hydrostatics and weight study the preliminary intact and damaged stability is run. A full report is generated reflecting various load conditions from lightship to full load confirming the vessel meets the specified regulatory body stability criteria.
PRELIMINARY WEIGHT STUDY
A detailed weight study is generated to establish the vessel weight and center of gravity and then compared to the hydrostatics. Changes will be made to the hull form if required from the results of the weight study.
REFITS
PRESS
ENGINEERING
PORTFOLIO
DESIGN PHILOSOPHY
BIO
Tough, luxurious megayachts built like small ships
CONTACT
Allegro 24
MARINER 98 RPH
MARINER 98 RPH
DAUNTLESS D73 RPH
INTERNATIONAL YACHT AND SHIP DESIGN SINCE 1989
OYD DESIGNS
HOME